Windows & Doors
Windows and doors installed square, sealed and easy to operate
Replacement and new-construction windows, entry doors, patio doors and interior doors for homes in Everett, Needham, Wellesley and the surrounding towns.
Windows & Doors in Everett, Needham and Wellesley
A good window or door should disappear into daily life: it opens smoothly, closes with a solid latch, keeps drafts out and never leaks. When one sticks, rattles or fogs, the cause is often installation, not the product. Units that are out of square, unsupported or poorly flashed fail early no matter what brand is on the label.
For windows, we offer insert replacements that fit inside the existing frame and save interior trim, and full-frame replacements that remove everything down to the rough opening. Full-frame is the right choice when the old frame is rotted or when we want to flash the opening properly, which is common in older homes in Needham, Wellesley and Everett.
Every opening gets a sloped sill pan or flashing, side and head flashing lapped in the right order, and low-expansion foam or backer rod with sealant to stop air leaks without bowing the frame. Units are shimmed at the right points, checked for square and diagonal, and operated before trim goes on.
Doors range from exterior entry and storm doors to sliding and hinged patio doors and interior pre-hung and slab doors. Exterior doors get the same water management as windows, with sill pans and thresholds set to shed water. Interior doors are hung with even reveals and hardware that latches without force.
New windows and doors almost always need new trim inside or out. Our finish carpenters case them to match the rest of the house, and on the exterior the work ties into siding and flashing so water stays out.
What you get
Smooth operation
Units are shimmed and squared so sashes slide and doors latch without effort.
Flashed for New England
Sill pans and lapped flashing direct wind-driven rain back outside.
Fewer drafts
Proper air sealing around frames cuts cold spots and condensation.
Trim that matches
Interior and exterior casing finished to blend with the rest of the home.
Rot addressed
Damaged sills and framing are repaired before the new unit goes in.
Right option for each opening
Insert or full-frame replacement chosen opening by opening, not as a blanket rule.
What is included
Window replacement
- Insert and full-frame options
- Removal and disposal of old units
- Rough opening repair
- Air sealing and insulation
Exterior doors
- Entry and side doors
- Storm doors
- Sliding and hinged patio doors
- Thresholds and sill pans
Interior doors
- Pre-hung door installation
- Slab doors in existing jambs
- Closet and pocket doors
- Hardware and adjustments
Trim and finish
- Interior casing and stools
- Exterior PVC or wood trim
- Caulking and sealing
- Paint-ready finish
Our windows & doors process
Measure each opening
We measure, check frame condition and recommend insert or full-frame for each unit.
Order products
You choose style, glass, color and hardware, and we order exact sizes.
Remove and repair
Old units come out one opening at a time so your home is never left open overnight.
Install and seal
New units are flashed, shimmed, squared, sealed and tested for operation.
Trim and clean
Casing and exterior trim are installed, then we clean glass and remove debris.
Why hire a professional
Manufacturers' warranties often depend on correct installation, and many window problems come from openings that were not flashed or units that were forced into an out-of-square frame. Professional installation protects both the product and the wall around it.
Doors are similar. An exterior door that is not set on a proper sill pan can let water into the subfloor for years before anyone notices. A careful installer prevents that and leaves a door that closes with a quiet, solid click.
Replacing several openings at once also benefits from a coordinated crew. One opening is removed and closed in at a time, interior trim is fitted the same day, and the exterior is sealed before evening, so your home stays secure and weather-tight throughout the project.
Real projects
Recent windows & doors work from Needham, Wellesley and neighboring towns.
Windows & Doors questions
Insert replacements are faster and keep existing trim, which works well when frames are solid and square. Full-frame replacement is better when frames are rotted, drafty or when you want new trim and the best possible flashing.
Most homes take one to three days for ten to fifteen windows, depending on type and the condition of the openings. Product lead times are usually the longest part of the schedule.
Yes, as long as sizes are correct for the openings. We measure first to confirm, and we note that warranty questions about the product go through the seller.
Fogging inside double-pane glass means the seal has failed. The glass unit or the sash can sometimes be replaced alone; otherwise the window needs replacing.
A sill pan is a waterproof tray under a door or window that catches any water getting past the unit and directs it outside. It is one of the most important details for preventing hidden rot.
Usually, with a new header sized for the wider opening. Our framing crew handles the structural change and the door installation together.
Replacement windows often fall under a simplified permit in Massachusetts, while new or enlarged openings require a building permit. We confirm with your town.
Where we offer windows & doors
We work from Everett across Greater Boston, including Needham, Wellesley and the towns below.
- Everett
- Newton
- Weston
- Needham
- North Andover
- Wellesley
- Somerville
- Medford
- Brookline
- South Boston
- Swampscott
- Cambridge
- Revere
- Melrose
- Milton
- Hyde Park
- Malden
- Danvers
Ready to plan your project?
Tell us what you want to change. We will visit, measure and send a clear written estimate.